TMC Racks

Navigation Aids:

Back to Tables List
Back to TMC Repository Home Page
Back to JP's Radio Home Page

Below is a list of all of the rack (RAK) products offered by TMC.  

 Model Description TB or SSB MIL Nomenclature
RAK-1 Equipment Cabinet, 77" panel space, 83-1/8" x 22" x 18" CY-2530/U
RAK-2 Equipment Cabinet, 77" panel space, 84" x 24" x 26"
RAK-3 Equipment Cabinet, 53" panel space, 60" x 24" x 24"
RAK-4 Equipment Cabinet, 21" panel space, 23-1/8"" x 20-9/16" x 16-5/8" CY-2416/U
RAK-4A Equipment Cabinet, See A-1524, Basic RAK-4
RAK-5 Equipment Cabinet, 40-9/32" panel space, 43-13/32" x 20-5/8" x 19"
RAK-6 Equipment Cabinet, for use with MSR + GPR-90RX, See DWG SY-1232
RAK-7 Equipment Cabinet, for use with PTE.  See Dwg SY-1232, 49-34" x 20-11/16" CY-2805/GRM-33
RAK-7A Equipment Cabinet, for use with PTE-1
RAK-7B Equipment Cabinet, for use with PTE-3 CY-2805A/GRM-33
RAK-7D Similar to RAK-7C, except AX-248 replaced by panel without manual sweep control
RAK-8 Equipment Cabinet, 40-1/4" panel space, 42-1/2"" x 20-5/8" x 19"
RAK-9 Equipment Cabinet, for use with SBT-1K, 70" panel space, 71-1/2"" x 20-5/8" x 22-1/2" CY-3004/URT-19(V)
RAK-9A Equipment Cabinet, for use with SBT-1KA, SBT-1KL
RAK-9A1 Equipment Cabinet, for use with SBT-1KA2, SBT-1KL2
RAK-9B Equipment Cabinet, for use with SBT-1KB, SBT-1KM
RAK-9B1 Equipment Cabinet, for use with SBT-1KB2, SBT-1KM2
RAK-9C Equipment Cabinet, for use with SBT-1KC
RAK-9C1 Equipment Cabinet, for use with SBT-1KC2
RAK-9D Equipment Cabinet, for use with SBT-1KD
RAK-9D1 Equipment Cabinet, for use with SBT-1KD2
RAK-9E Equipment Cabinet, for use with SBT-1KN, SBT-1KO
RAK-9E1 Equipment Cabinet, for use with SBT-1KN2, SBT-1KO2
RAK-9G Equipment Cabinet, for use with SBT-1KS
RAK-9G1 Equipment Cabinet, for use with SBT-1KS2
RAK-9Q Equipment Cabinet, Never Used
RAK-9Q1 Equipment Cabinet, for use with SBT-1KQ2
RAK-10 Equipment Cabinet, for use with SBT-1KJ (for use with fans) 63" panel space, 64-1/2" x 20-5/8" x 21-19/32"
RAK-10A Equipment Cabinet, for use with SBT-1KJ 
RAK-10A1 Equipment Cabinet, for use with SBT-1KJ2
RAK-11 Equipment Cabinet, for use with SBG + SBT-1K systems, 57-25/32" panel space, 59-9/32" x 20-5/8" x 22-1/2"  CY-2823/URA-30
RAK-11A Equipment Cabinet, for use with SBG-1, SBG-2
RAK-11A1 Equipment Cabinet, for use with SBG-1, SBG-2
RAK-11B Equipment Cabinet, for use with SBT-1KE, SBT-1KF, SBT-1KG, SBT-1KH, SBT-1KP 
RAK-11B1 Equipment Cabinet, for use with SSBT-1KE2, SBT-1KF2, SBT-1KG2, SBT-1KH2, SBT-1KP2 
RAK-11C Synthesizer
RAK-11D DDR-7D
RAK-12 Equipment Cabinet, for use with DDR-6 system, 70" panel space, 74-3/4" x 20-5/8" x 22-1/2"
RAK-12B Equipment Cabinet, for use with DDR-6B
RAK-12D Basic RAK-12
RAK-12G Equipment Cabinet, used with DDR-6M
RAK-12H Used with DDR-6N
RAK-13 Equipment Cabinet, used with DDR-6, 70" panel space, 74-3/4" x 20-5/8" x 22-1/2"
RAK-14 Equipment Cabinet,  70" panel space, 72-1/4" x 20-5/8" x 22-1/2"
RAK-15 Equipment Cabinet,  50-3/16" panel space, 52-5/16" x 20-5/8" x 22-1/2"
RAK-16 Equipment Cabinet,  57-25/32" panel space, 59-9/32" x 20-5/8" x 22-1/2" OA-3078/GRT-9
RAK-17 Equipment Cabinet, for use with SBT-1K 57-25/32" panel space, 59-9/32" x 20-5/8" x 22-1/2"
RAK-17A Equipment Cabinet, for use with SBT-1KE, SBT-1KG
RAK-17A1 Equipment Cabinet, for use with SBT-1KE2, SBT-1KG2
RAK-17B Equipment Cabinet, for use with SBT-1KH, SBT-1KF
RAK-17B1 Equipment Cabinet, for use with SBT-1KF2, SBT-1KH2
RAK-17C Equipment Cabinet, for use with SBT-1KP
RAK-17C1 Equipment Cabinet, for use with SBT-1KP2
RAK-18 Equipment Cabinet, for use with DDR-6B, 77" panel space, 83-1/8" x 22" x 18" (special)
RAK-19 Equipment Cabinet, for use with SBT-350, 57-25/32" panel space, 59-9/32" x 20-5/82" x 22-1/2"
RAK-19A Equipment Cabinet, for use with SBT-350R, SBT-350S
RAK-19B Equipment Cabinet, for use with SBT-350T, SBT-350U
RAK-19D Equipment Cabinet, for use with SBT-350I, SBT-350J
RAK-19G Equipment Cabinet, for use with SBT-350M, SBT-350N
RAK-20 Equipment Cabinet, for use with SBG-1 and -2 with LFA-1 and -2 CY-3443/URA-41
RAK-20A Equipment Cabinet, see Dwg. MS-2509-2, Sheet 1, for SBG-1X
RAK-20B Same RAK-( ) for SBG-1L,M; for test rack (See W. Deans)
RAK-21 Equipment Cabinet, DDR-5 single rack 69"h x 24-1/4" w. CY-3566/FRR-60(V)
RAK-21B New Kit no. KIT-230, converts RAK-21B to RAK-21C by adding hardware to accept following equipment:  RTPE-1, RTIE-1, RTKY-1, UTD-1, RCSA-1, RSBA-1, RTTA-1
RAK-22 Equipment Cabinet, DDR-5 Dual Rack CY-3567/FRR-60(V)
RAK-22B Interconnect cabling ventilation and unit mounting info required
RAK-23D Equipment Cabinet, for use with G{T-350D
RAK-24 Equipment Cabinet, same as RAK-11 but with special shock mounts
RAK-25 Equipment Cabinet, same as RAK-17 but with special shock mounts
RAK-26 Equipment Cabinet, similar to RAK-9 but is aluminum with shelves for large equipment like teletype machines
RAK-27 Equipment Cabinet, modified RAK-17 for GPT-1KA, GPT-1KB
RAK-28 Equipment Cabinet, modified RAK-9 for GPT-1K
RAK-29A Equipment Cabinet, for use with DDR-9A, 74-3/4" x 20-5/8" x 22-1/2"
RAK-30A Equipment Cabinet, for use with DDR-7A, 70" panel space
RAK-30B Equipment Cabinet, for use with DDR-7F
RAK-30C Equipment Cabinet, for use with DDR-7K, 70" panel space
RAK-31A Equipment Cabinet, for use with DDR-8A-3213 and DDR-8-3203, 70" panel space
RAK-31B Equipment Cabinet, for use with DDR-8-3023
RAK-32A Equipment Cabinet, for use with DDR-6H
RAK-33A Equipment Cabinet, for use with DDR-6F
RAK-34 Equipment Cabinet, for use with MS-2509-2
RAK-35 Equipment Cabinet, basic RAK-21 with wiring to accommodate the dual independent AGC system for the U.S. Navy
RAK-36 Equipment Cabinet, for special Canadian project.  77" panel space, S. O. #C10,027, 83" x 22" x 24"
RAK-37 Equipment Cabinet, for special Canadian project.  77" panel space, S. O. #C10,027, 83" x 22" x 20"
RAK-38 Equipment Cabinet, for use with DDR-5A remote unit
RAK-39 Equipment Cabinet, for use with DDR-5F
RAK-40 Equipment Cabinet, for use with DDR-5G
RAK-41 Equipment Cabinet, for use with DDR-5H
RAK-42 Equipment Cabinet, for use with DDR-59( ) special, See PCM
RAK-43 Basic RAK-21 used for VLFC
RAK-44 Basic RAK-21 used for LRRA-1
RAK-45 Basic RAK-9 empty RAK for antenna patching
RAK-46 Blank RAK-9
RAK-47C Used with DDR-7C.  Parmetal PX-8424B Base Mount
RAK-47B Used with DDR-7B.  Parmetal PX-8424B Base Mount
RAK-48 Same as RAK-21 but wired for ARCA-1 Technical Tuning System
RAK-49 Used with DDR-53, Same as RAK-22
RAK-50 Used with DDR-501, Same as RAK-21
RAK-51 Used with DDR-551, Same as RAK-21
RAK-52 Used with DDR-502, Same as RAK-22
RAK-53 Used with DDR-52, Same as RAK-21
RAK-54 Used with DDRR-5K, Basic RAK-21
RAK-55 Basic RAK-22 for DDRR-5L
RAK-56 Basic RAK-22 for DDRR-5M
RAK-57 Basic RAK-22 for DDRR-5N
RAK-58 Basic RAK-22 for DDRR-5P
RAK-59 Basic RAK-22 for DDRR-5Q
RAK-60 Basic RAK-21 for DDRR-5R
RAK-61 Basic RAK-21 for DDRR-5S
RAK-62 Basic RAK-( ) for DDRR-5T
RAK-65 Basic MS-3080 for DDR-5M
RAK-66 Basic  for DDR-5N
RAK-67 Basic  MS-3081 for DDR-5P
RAK-68 Basic  MS-3080 for DDR-5Q
RAK-69 Basic  MS for DDR-5R
RAK-70 Basic  MS for DDR-5S
RAK-71 Basic  MS for DDR-5T
RAK-72 Basic  MS for DDR-5U
RAK-73 Equipment Cabinet for LRRB-1
RAK-75-( ) Equipment Cabinet Series.  This is a basic number series for a cabinet 69" high with 63" x 19" panel space.  Steel
RAK-76-( ) Aluminum Equipment Cabinet Series.  Basic number series for an aluminum equipment cabinet 69" high with 63" x 19" panel space.  Identical to RAK-75-( ) series, but made of aluminum.
RAK-76-2 Aluminum cabinet for DDR-5K.  Includes Barry shock mounts
RAK-77 Has same configuration as RAK-7 except depth of vertical is 30" deep, depth of cabinet top is 24-1/2" deep.
RAK-85-( ) Equipment Cabinet Series.  This is a basic number series for a steel, dual cabinet.  Each half 69" high OA, with 63" x 19" panel space.  OA- 69" H x 47" W x 30" D.
RAK-85-2 Equipment Cabinet.  For DDRR-5M.  Steel.  69" H OA x 47" W x 30" D.
RAK-96-2 Similar to RAK-21 except made of aluminum with no front door.  Shock mounts added, blower motor, plus silicone spray protection of terminal boards.
RAK-100 Equipment Cabinet, for DDR-50. 77" panel space, 83" x 24-1/4" x 30".
RAK-101 Equipment Cabinet, for DDR-51. 77" panel space, 83" x 24-5/8" x 30".
RAK-102-( ) Basic number series.  83" OA height, 77" panel space.  Engineering Coordination Dept to assign numerical suffix to denote specific wiring and hardware configuration.  Steel construction.
RAK-103 Equipment Cabinet, used with DDR-55
RAK-104 Equipment Cabinet, same as RAK-102, houses the MSGA system which is part of the DDR-552
RAK-105 Special Equipment Rack for Model PPTA-1, RF Dsitribution System.  Panel space 70" x 20".  76"h x 33" w x 24" d.
RAK-106 Equipment rack for MCTR-350, S.O. 22549
RAK-110-( ) Basic number series for a family of cabinets 59-9/32"h x 20-5/8" w x 22-1/2" d overall, with 57-3/4" panel space.  Numerical suffix shall be assigned by Engineering Coordination Dept to denote specific wiring and hardware configuration.  Steel construction.  No front door.
RAK-110-2 Equipment Cabinet, Steel.  59-9/32"h x 20-5/8"w x 22-1/2" d overall with 57-3/4" panel space for TSTA-2.5K
RAK-110-3 Basic RAK-110, wired for MMX( )-2, TLAM-1K, AP-150, AP-149, APP-18 (HFTM-1KJ) System 1200 (Iberlant)
RAK-110-4 Basic RAK-110, wired for HFLM-1K, SBGM-4, ATS-2 (HFTM-1KA).  SO # 31-0438-120
RAK-111-1 Basic RAK-110( ) shortened to 52-1/2" high 4/19/66
RAK-115-( ) Basic series for DDR-5.  Open frame, no skins.  53-3/32"h x 20-13/16"w x 24"d.  Panel space 50-3/4".  Aluminum.  40# weight.
RAK-120 Equipment rack for DDR-10K (Synth and unsynth) (Steel) 34-3/4" x 20-5/8" x 24".  33-1/4" panel space (not including shock mounting). p/o DDR-10 series.
RAK-120-1 DDR-10K
RAK-125 Equipment rack for DDR-10L.  68" x 20-5/8" x 24", 66-1/2" panel space.  DDR-10 series (shock mounting no included)
RAK-125-1 DDRR-10M
RAK-127-( ) Modified CY-597 A/G (GFE)
RAK-127-2A AN/URR-64(V)2 (DDR-10K)
RAK-127-2B AN/URR-64(V)3 (DDR-10L)
RAK-127-2C AN/URR-64(V)1 (DDR-10M)
RAK-127-2D AN/URR-63(V)1 (DDRR-10K)
RAK-127-2E AN/URR-63(V)2 (DDRR-10M)
RAK-135 MS-5459
RAK-135-2 Wired for DDRR-10N2, consisting of 2 each HFRR-5, MSAR-5, HFSR-4, RTTD-4, LSP-12 (NACOM II)
RAK-135-3 Wired for DDRR-10M2, consisting of 2 each HFRR-5, MSAR-5, HFSR-4, RTTD-4, LSP-12, 1each RTMU-42  (NACOM II)
RAK-135-4 Wired for DDRR-10K2,  HFRR-5, MSAR-5, HFSR-4, RTTD-4, LSP-12, RTMU-42
RAK-135-5 Wired for SYM-4200 (NACOM II Receiver Filter System) consisting of 6 each LPFB-2(6), wired for control by RCP-6
RAK-135-6 Wired for SME(R)6-8, LRCA-2, RAS-2, AX-5128.  S.O. 31-0560, TMC Ag.
RAK-136 RAK-135 except replace filter panel with blower panel.
RAK-136-2 Wired for SBGR-4YA(NACOM II transmitter system)
RAK-137 Cabinet, Electrical Equipment.  HFTA-1KJ, ITT Mackay Marine Supplied 19" x 73-7/8"
RAK-138 Basic equipment cabinet for HFTA-1K  9/13/71, B. Nap
RAK-138-1 CAB 40 (4') MS 6230
RAK-138-2 CAB 50 (5') MS 6230
RAK-138-3 CAB 60 (6') MS 6230
RAK-138-( )A HFLA-1K Only
RAK-138-( )B HFLA-1K + TFP-1K
RAK-138-( )C HFLA-1K + ATSA-3
RAK-138-( )D HFLA-1K + TFP-1K + ATSA-3
RAK-138-3E SYM-5201 Maritime HFLA-1K(3P) + TFR-1K + ATSA-3 + GPR-110
RAK-139 Basic Equipment Cabinet for HFTM-1K (8/9/72, B. Nap)
RAK-139-1 CAB 40 (4')
RAK-139-2 CAB 50 (5')
RAK-139-3 CAB 60 (6')
RAK-139-( )A HFLM-1KA only
RAK-139-( )B HFLM-1KA + TFP-1K
RAK-139-( )C HFLM-1KA + ATS-3
RAK-139-( )D HFLM-1KA + TFP-1K + ATS-3
RAK-140 Basic equipment cabinet for GPT-1K
RAK-140-1 4' OA height, uses MS-6230-1S (used on GPTR-1K)
RAK-140-2 5' OA height, uses MS-6230-1S (used on GPTR-1K)
RAK-140-3 6' OA height, uses MS-6230-1S (used on GPTR-1K)
RAK-140-( )A TMA-1K, HFL-100, SMER-5, ADC-5
RAK-141-( ) TMA-1K, HFL-100, MMXA-2 (GPTA-1KJ)
RAK-142-1M  -2A  -3R HFTA-10KJA
RAK-143 HFTR-10KJA remote rack S.O. 525208 Cyprus (MS-5476)
RAK-144 1982 System HFTM-1KJ2B.  HFLM-1KA, TLAM-1KA, AP-152, AP-151, MMX-2B.  48"h x 26"d x 22" w.

Navigation Aids:

Back to Tables List
Back to TMC Repository Home Page
Back to JP's Radio Home Page